Example of our glass services
Toughened Glass
There are two types of “Toughened” glass; “heat-treated” and “chemically treated”. There are two further types of “heat-treated” glass, “heat-strengthened”, and “fully-tempered”. Fully-tempered heats the glass to above its annealing point, and then rapidly cools the glass. This makes it approximately four to six times tougher than standard float glass, enabling it to qualify as a safety glass that conforms to BS 6206 Class A.
Heat-strengthened follows a similar process, but is only twice as tough, and does not qualify as a safety glass. Chemical toughening involves running the glass through a bath of molten potassium nitrate, which exchanges the smaller sodium ions in the glass, with the bigger potassium ions in the molten bath.
The advantages of this are two-fold; the glass is tougher than when heat treated, and this approach can be applied to glass of complex shapes and sizes, making it suitable not just for glass sheets, but also for glass ornaments, and glass of unusual sizes.
Haslingden replacement glass 24/7
Express Haslingden glaziers replace glass for a variety of reasons. we provide an emergency response service for broken glass repairs where we would board the windows for your security and then replace the glass usually within 48 hours in and around the Haslingden area.
Glass in Haslingden commercial properties that should be but doesnt meet safety requirements can be replaced with safety glass. All enquiries are welcome with free estimates and quotes by phoning our Haslingden team.
Glass for use in Haslingden domestic properties typically comes in two varieties; single or double-glazed, with a choice of either float/annealed or toughened glass. Single-glazed windows with float glass can normally be fitted on the same day. Our Haslingden glaziers are able to replace glass from either the outside or the inside of properties, if the framework allows it. If required, we can source scaffolding and/or lifting vehicles for high glass installations.
Quality service approved
- © 2010 - Contact glazing engineers